M7284Q1009

BULK ORDERS OR LESS COMMON PRODUCTS MAY REQUIRE ADDITIONAL TIME FOR SHIPPING.CONTACT USVIA PHONE OREMAILTO REQUEST MORE INFORMATION ON AVAILABILITY, AND FOR PART NUMBERS NOT LISTED

M7284Q1009Overview:

150 lb-in, NSR Actuator, 4-20mA control, 2 Aux. Switches, 120V

Application:

The Series 72 Modutrol IV Motors are spring return and non-spring return motors used to control dampers and valves. The motors accept a current or voltage signal from an electronic controller to position a damper or valve at any point between open and closed.

Product Specifications:

• Application: Electric
• Dimensions (in.): 6 7/16 in. high x 5 1/2 in. wide x 7 5/16 in. deep
• Dimensions (mm): 164 mm high x 140 mm wide x 185 mm deep
• Includes: Transformer and Screw Terminal Adapter
• Weight (lb): 7.5 lb
• Comments: Adjustable zero and span for split range applications
• Item Type: Product
• Mounting: Foot-mounted
• Frequency: 50 Hz; 60 Hz
• Approvals, Underwriters Laboratories Inc.: Listed: File No. E4436, Guide No. XAPX for USA and Canada
• Electrical Connections: Screw terminals
• Supply Voltage: 120V
• Power Consumption: Driving– 15 VA
• Approvals, CE: EN55011 (Emission) EN50082-2 (Immunity) 73/23/EEC (LVD)
• Ambient Temperature Range (F): -40 F to +150 F
• Ambient Temperature Range (C): -40 C to +60 C
• Internal Auxiliary Switch: 2
• Auxiliary Switch Ratings: AFL – 120 Vac– 7.2A; ALR- 120 Vac– 43.2A; AFL – 240 Vac– 3.6A; ALR- 240 Vac– 21.6A
• Stroke: Adjustable; 90 to 160 degrees, Symmetrical
• Shaft Dimensions (in.): 0.375 in. Square
• Control Signal: Modulating, 4-20 mA
• Fail Safe Mode: Non-Spring Return
• Torque Rating (lb-in.): 150 lb-in.
• Torque Rating (Nm): 17 Nm
• External Auxiliary Switches Available: Yes
• Shaft Rotation (upon control signal increase): Clockwise (as viewed from power end) (normally closed)
• Factory Stroke Setting: 90 degrees
• Timing, Nominal: 30-60 sec
• Feedback: No
• Shaft Dimensions (mm): 10 mm Square
• Motor shafts: Dual-ended shaft
• Deadweight Load on Shaft: Either End– 200 lbs.; Combined on both Shafts– 300 lbs.
• Internal Transformer: 50004263-002

Resources:

• Honeywell 71, 72 and 76 Modulating Motors Datasheet
• Honeywell M72 Modulating Motor Specifications
• Honeywell Damper Motor Adjustment Guide