ARMOUR Detail Supply Microfiber Coating Application Pad

The Armour Detail Supply Microfiber Coating Application Pad makes the coating process easier, quicker, and more efficient. These are included in each Armour Coating Kit, but available for purchase separately. The main advantage of using these application pads during your coating installation is conserving valuable product. The Armour Detail Supply Microfiber Coating Application Pad includes a hydrophobic plastic barrier between the microfiber and foam insert, making both sides usable! This prevents excess coating product from soaking through the microfiber into the sponge. It also limits excess product buildup from our Armour Quartz Coatings which can become hard, gummy, and tacky as the coating begins to cure.

Guide to use

• Dip coating on the application pad and apply section by section.
• As the coating begins to cure and harden, flip to the fresh side of the application pad.
• Each side of the applicator is designed for a one-time use since coatings cure and harden on the surface. Once both sides have been used, discard the applicator.

Innovative
Efficient Coating

A hydrophobic plastic barrier between the microfiber and foam insert, prevents excess product buildup from our Armour Quartz Coatings which can become hard, gummy, and tacky as the coating begins to cure.

FAQs

Can the applicator be reused?
Each side of the applicator is designed for a one-time use since coatings cure and harden on the surface. Once both sides have been used, discard the applicator.

Why use these applicators over others?
Simple, these Application Pads will save you time and money! The hydrophobic plastic barrier allows you to save coating product, and the larger size creates a more efficient coating application.

How often will I need to flip sides of the applicator?
This will depend on which coating you are using. You can generally feel as the pads get gummed up or start to harden. With our Armour Quartz Coating you will generally flip sides half way through the vehicle. With our Armour PRO Coating you will generally flip sides every 3-4 panels.